DETAILS & DOWNLOADS
Together with its partners ELUXI is able to offer a comprehensive range of solutions in this area. If you cannot find what you are looking for from the information below, please contact us directly.
PHOTOVOLTAIC SOLDERABLE CHIP
SILICON SOLDERABLE CHIPS
The Solderable photodiode chip series offer a low cost approach to applications requiring large active area photo detectors with or without flying leads for ease of assembly and / or situations where the detector is considered "disposable". They have low capacitance, moderate dark currents, wide dynamic ranges and high open circuit voltages. These detectors are available with two 3" long leads soldered to the front (anode) and back (cathode). The Photovoltaic Solderable Series (SXXVL) are used for low noise applications.
All of the devices are also available in chip form without any leads. For ordering subtract suffix 'L' from the model number, e.g. S-
For large signal outputs, the detectors can be connected directly to a current meter or across a resistor for voltage measurements. Alternately, the output can be measured directly with an oscilloscope or with an amplifier. Please refer to the "Photodiode Characteristics" section for further details.
Applications
- Pulse Detectors
- Optical Communications
- Bar Code Readers
- Optical Remote Control
- Medical Equipment
- High Speed Photometry
Photovoltaic
Solderable Chip
Features
- High Speed Response
- Low Capacitance
- Low Dark Current
- Wide Dynamic Range
- High Responsivity
Photovoltaic
Solderable Chip
Delivering
Photonics Solutions
Home ¦ Company ¦ Products ¦ Support ¦ News & Events ¦ Contact Us ¦ Find Us
Copyright © ELUXI Ltd -
